Mobilis 3D tempered glass with a hardness of 9H and a thickness of 0.3mm.

Provide your device with maximum protection with Mobilis 3D tempered glass, which offers top-notch hardness of 9H and a thickness of just 0.3 mm. The oleophobic layer effectively repels grease, fingerprints, and other dirt. This protective glass is the ideal choice for anyone looking for quality and reliable screen protection for their mobile phone.

Key Features:

• Hardness 9H: On the Mohs hardness scale, which measures the resistance of materials, 9H reaches a level just below diamond, which is at the highest point on the scale (10H). Therefore, Mobilis tempered glass is exceptionally resistant to scratches from sharp objects like keys or coins.
• 3D Design: This glass is curved not only at the edges but also across its entire surface, allowing it to better conform to the shape of curved displays. Unlike 2.5D glass, which has only slightly rounded edges, 3D glass perfectly adheres to curved screens and covers the entire display, including its curved parts. This ensures better protection against scratches and impacts, especially for phones with significantly curved displays. However, when using some protective cases, the case may lift the glass at the edges, which can lead to peeling. Therefore, it is ideal to use it without a case or choose a compatible case that accommodates the curvature of the glass.
• Thickness 0.3 mm: Due to its ultra-thin construction, the glass is nearly invisible and does not interfere with the sensitivity of the touchscreen.

Mobilis protective glass is the perfect solution for users who want to protect their phone from scratches, impacts, and other external influences without sacrificing aesthetics or functionality. Even during an unexpected fall or strong impact, the protective glass absorbs most of the impact energy, keeping your display intact. Mobilis protective glass is a smart investment that pays off. With its help, you can be sure that your phone will remain in perfect condition even with daily use.

Give your device the best and ensure its longevity.

Instructions for applying the tempered glass:

1. Prepare your workspace: Find a clean and well-lit area. It is recommended to work in an environment with minimal dust to avoid dirt on the display during application.

2. Clean the display: Use a cleaning wipe to thoroughly clean the display from fingerprints, dust, and grease. Then dry the display with a dry cloth.

3. Remove any remaining dirt: Use the included sticker (or dust remover) to remove any remaining dirt or dust particles from the display.

4. Remove the protective film from the glass: Carefully peel off the protective film from the tempered glass without touching the adhesive side of the glass.

5. Place the glass on the display: Align the tempered glass with the edges of the display, especially at the cutouts for the camera, speaker, and buttons. Apply the glass from one side of the display (start from the top or middle) and slowly press it down.

6. Remove air bubbles: Once the glass is on the display, gently press it to ensure adhesion. If air bubbles appear, use a cloth or finger to push them toward the edges.

7. Let the glass settle: After application, allow the glass to adhere for a while to settle firmly on the display. Avoid immediately putting on a protective case until the glass fully adheres.

8. Putting on a protective case (optional): If you are using a protective case, carefully check that it does not interfere with the edges of the glass and does not cause it to lift.

Following these steps will ensure proper application of the tempered glass, maximum protection for the display, and extended lifespan of the protection.