Mobilis 2.5D tempered glass with 9H hardness, thickness of 0.3mm.

Provide maximum protection for your device with Mobilis 2.5D tempered glass, offering top-notch 9H hardness and a thickness of just 0.3 mm. The oleophobic layer effectively repels grease, fingerprints, and other dirt. This protective glass is an ideal choice for anyone seeking quality and reliable screen protection for their mobile phone.

Key features:

• 9H Hardness: On the Mohs hardness scale, which measures the resistance of materials, 9H hardness is just below diamond, which is at the highest level (10H). Therefore, Mobilis tempered glass is exceptionally resistant to scratches from sharp objects like keys or coins.
• 2.5D Design: This glass is designed with gently rounded edges, ensuring comfortable use during touch without sharp corners. The difference between 2.5D and 3D glass primarily lies in the degree of edge curvature – while 2.5D has only slightly rounded edges, 3D glass is curved across the entire surface and better conforms to curved displays. 2.5D glass is ideal for flat screens; for some models with significantly curved displays, 2.5D glass may not cover the entire screen area, but it is often advantageous for use with protective cases as it reduces the risk of the glass peeling off when using a cover.
• Thickness of 0.3 mm: Thanks to its ultra-thin construction, the glass is nearly invisible and does not interfere with the touch screen's sensitivity.

Mobilis protective glass is the perfect solution for users who want to protect their phone from scratches, impacts, and other external influences without sacrificing aesthetics or functionality. Even during an unexpected fall or strong impact, the protective glass absorbs most of the impact energy, keeping your display intact. Mobilis protective glass is a smart investment that pays off. With its help, you can be sure that your phone will remain in perfect condition even with daily use.

Give your device the best and ensure its longevity.

Instructions for applying tempered glass:

1. Prepare your workspace: Find a clean and well-lit area. It is recommended to work in an environment with minimal dust to avoid dirt on the display during application.

2. Clean the display: Use a cleaning wipe to thoroughly clean the display of fingerprints, dust, and grease. Then dry the display with a dry cloth.

3. Remove any remaining dirt: Use the included sticker (or dust remover) to eliminate any remaining dirt or dust particles from the display.

4. Peel off the protective film from the glass: Carefully peel the protective film from the tempered glass without touching the adhesive side of the glass.

5. Place the glass on the display: Align the tempered glass with the edges of the display, especially around the cutouts for the camera, speaker, and buttons. Apply the glass from one side of the display (starting from the top or middle) and slowly press it down.

6. Remove air bubbles: Once the glass is on the display, gently press it down to ensure it adheres. If air bubbles appear, use a cloth or your finger to push them towards the edges.

7. Let the glass settle: After application, allow the glass to adhere for a while to firmly settle on the display. Avoid immediately putting on a protective case until the glass fully adheres.

8. Installing a protective case (optional): If you are using a protective case, carefully check that it does not interfere with the edges of the glass and cause it to lift.

Following these steps will ensure proper application of the tempered glass, maximum screen protection, and an extended lifespan of the protection.