Mobilis 2.5D tempered glass with a hardness of 9H and a thickness of 0.3mm.

Provide your device with maximum protection with the Mobilis 2.5D tempered glass, which offers top-notch hardness of 9H and a thickness of just 0.3 mm. The oleophobic layer effectively repels grease, fingerprints, and other impurities. This protective glass is the ideal choice for anyone seeking high-quality and reliable screen protection for their mobile phone.

Key Features:

• Hardness 9H: On the Mohs hardness scale, which measures the resistance of materials, a hardness of 9H is just below diamond, which ranks highest on the scale (10H). Therefore, the Mobilis tempered glass is exceptionally resistant to scratches from sharp objects such as keys or coins.
• 2.5D Design: This glass is designed with slightly rounded edges, ensuring comfortable use during touch without sharp edges. The difference between 2.5D and 3D glass mainly lies in the degree of edge curvature – while 2.5D has only slightly rounded edges, 3D glass is curved across the entire surface and better conforms to curved displays. 2.5D glass is ideal for flat screens; in some models with significantly curved displays, 2.5D glass may not cover the entire screen area, but it is often advantageous for use with protective cases, as it reduces the risk of glass detachment when using a cover.
• Thickness 0.3 mm: Thanks to its ultra-thin construction, the glass is nearly invisible and does not interfere with the sensitivity of the touchscreen.

The Mobilis protective glass is a perfect solution for users who want to protect their phone from scratches, impacts, and other external influences without sacrificing aesthetics or functionality. Even in the event of an unexpected fall or strong impact, the protective glass absorbs most of the impact energy, keeping your display intact. The Mobilis protective glass represents a smart investment that pays off. With its help, you can be sure that your phone will remain in perfect condition even with daily use.

Give your device the best and ensure its longevity.

Instructions for applying tempered glass:

1. Prepare your workspace: Find a clean and well-lit area. It is recommended to work in an environment with minimal dust to prevent impurities on the display during application.

2. Clean the display: Use a cleaning wipe to thoroughly clean the display of fingerprints, dust, and grease. Then dry the display with a dry cloth.

3. Remove any remaining impurities: Use the provided sticker (or dust remover) to remove any remaining dirt or dust particles from the display.

4. Remove the protective film from the glass: Carefully peel off the protective film from the tempered glass without touching the adhesive side of the glass.

5. Place the glass on the display: Align the tempered glass with the edges of the display, especially around the cutouts for the camera, speaker, and buttons. Apply the glass from one side to the display (start from the top or middle) and slowly press it down.

6. Remove air bubbles: Once the glass is on the display, gently press it to ensure adhesion. If air bubbles appear, use a cloth or your finger to push them towards the edges.

7. Let the glass settle: After application, allow the glass to adhere for a while to firmly settle on the display. Avoid immediately putting on a protective case until the glass fully adheres.

8. Applying a protective case (optional): If you are using a protective case, carefully check that it does not interfere with the edges of the glass and cause it to lift.

Following these steps will ensure the proper application of the tempered glass, maximum protection of the display, and prolongation of the protective life.