Mobilis 2.5D tempered glass with 9H hardness, thickness 0.3mm.

Provide your device with maximum protection with Mobilis 2.5D tempered glass, offering superior hardness of 9H and a thickness of just 0.3 mm. The oleophobic layer effectively repels grease, fingerprints, and other impurities. This protective glass is an ideal choice for anyone looking for quality and reliable screen protection for their mobile phone.

Key Features:

• Hardness 9H: On the Mohs hardness scale, which measures material resistance, 9H hardness is just below diamond, which ranks highest on the scale (10H). Therefore, Mobilis tempered glass is extremely resistant to scratches from sharp objects like keys or coins.
• 2.5D Design: This glass is designed with gently rounded edges, ensuring comfortable touch usage without sharp edges. The difference between 2.5D and 3D glass lies primarily in the degree of edge curvature – while 2.5D has only slightly rounded edges, 3D glass is curved throughout and better conforms to curved displays. 2.5D glass is ideal for flat screens, and in some models with significantly curved displays, it may not cover the entire screen area, but it is often advantageous for use with protective cases, as it reduces the risk of the glass lifting when using a case.
• Thickness 0.3 mm: Thanks to its ultra-thin construction, the glass is almost invisible and does not interfere with the sensitivity of the touchscreen.

Mobilis protective glass is the perfect solution for users who want to protect their phone from scratches, impacts, and other external influences without losing aesthetics or functionality. Even in the event of an unexpected fall or strong impact, the protective glass absorbs most of the impact energy, keeping your display intact. Mobilis protective glass is a smart investment that pays off. With its help, you can be sure that your phone will remain in perfect condition even with daily use.

Give your device the best and ensure its longevity.

Instructions for applying tempered glass:

1. Prepare your workspace: Find a clean and well-lit area. It is recommended to work in an environment with minimal dust to prevent dirt on the display during application.

2. Clean the display: Use a cleaning wipe to thoroughly clean the display from fingerprints, dust, and grease. Then dry the display with a dry cloth.

3. Remove any remaining dirt: Use the provided sticker (or dust remover) to remove any remaining dirt or dust particles from the display.

4. Remove the protective film from the glass: Carefully peel off the protective film from the tempered glass without touching the adhesive side of the glass.

5. Place the glass on the display: Align the tempered glass with the edges of the display, especially around the cutouts for the camera, speaker, and buttons. Apply the glass from one side of the display (start at the top or middle) and slowly press it down.

6. Remove air bubbles: Once the glass is on the display, gently press it down to ensure adhesion. If air bubbles appear, use a cloth or your finger to push them towards the edges.

7. Let the glass settle: After application, allow the glass to adhere for a while to firmly settle on the display. Avoid immediately putting on a protective case until the glass fully adheres.

8. Installing a protective case (optional): If you are using a protective case, carefully check that it does not interfere with the edges of the glass and cause it to lift.

Following these steps will ensure proper application of the tempered glass, maximum screen protection, and extended lifespan of the protection.