Mobilis 2.5D Tempered Glass with 9H hardness, 0.3mm thickness.

Provide your device with maximum protection with the Mobilis 2.5D tempered glass, which offers top-notch hardness of 9H and a mere thickness of 0.3mm. The oleophobic layer effectively repels grease, fingerprints, and other dirt. This protective glass is the ideal choice for anyone looking for quality and reliable screen protection for their mobile phone.

Key Features:

• 9H Hardness: On the Mohs hardness scale, which measures material resistance, the 9H hardness level is just below diamond, which ranks highest at 10H. Therefore, the Mobilis tempered glass is exceptionally resistant to scratches from sharp objects like keys or coins.
• 2.5D Design: This glass is designed with gently rounded edges, ensuring comfortable use during touch without sharp corners. The difference between 2.5D and 3D glass mainly lies in the curvature of the edges – while 2.5D has slightly rounded edges, 3D glass is curved across the entire surface and better conforms to curved displays. 2.5D glass is ideal for flat screens, and in some models with significantly curved displays, it may not cover the entire screen area but is often advantageous for use with protective cases, as it reduces the risk of the glass peeling off when using a cover.
• 0.3mm Thickness: Thanks to its ultra-thin construction, the glass is nearly invisible and does not interfere with the sensitivity of the touch screen.

The Mobilis protective glass is the perfect solution for users who want to protect their phone from scratches, impacts, and other external influences without losing aesthetics or functionality. Even in the event of an unexpected fall or strong impact, the protective glass absorbs most of the impact energy, keeping your display intact. The Mobilis protective glass represents a smart investment that pays off. With its help, you can be sure that your phone will remain in perfect condition even with daily use.

Give your device the best and ensure its long lifespan.

Instructions for applying the tempered glass:

1. Prepare your workspace: Find a clean and well-lit area. It is recommended to work in an environment with minimal dust to prevent dirt on the display during application.

2. Clean the display: Use a cleaning wipe to thoroughly clean the display from fingerprints, dust, and grease. Then, dry the display with a dry cloth.

3. Remove any remaining dirt: Use the provided sticker (or dust remover) to remove any remaining dirt or dust particles from the display.

4. Remove the protective film from the glass: Carefully peel off the protective film from the tempered glass without touching the adhesive side of the glass.

5. Place the glass on the display: Align the tempered glass with the edges of the display, especially around cutouts for the camera, speaker, and buttons. Apply the glass from one side of the display (start at the top or center) and slowly press it down.

6. Remove air bubbles: Once the glass is on the display, gently press it down to ensure adhesion. If air bubbles appear, use a cloth or your finger to push them toward the edges.

7. Let the glass settle: After application, allow the glass to adhere for a while to ensure it settles firmly on the display. Avoid immediately putting on a protective cover until the glass has fully adhered.

8. Applying a protective cover (optional): If you are using a protective cover, carefully check that it does not interfere with the edges of the glass and cause it to lift.

Following these steps will ensure proper application of the tempered glass, maximum protection for the display, and extended lifespan of the protection.