Mobilis Electroplating Privacy Tempered Glass with 9H hardness and a thickness of 0.3 mm.

Protect your iPhone not only from damage but also from prying eyes. Electroplating Privacy Tempered Glass combines top-notch screen protection with a unique privacy technology, ensuring that only you can see the screen content.

Thanks to the electroplating surface finish, the glass has an elegant appearance, resists fingerprints, and stays clean even with daily use. With a hardness rating of 9H and a thickness of only 0.3 mm, it provides maximum safety without compromising touch sensitivity or image quality.

Whether you use your phone on public transport, in a café, or at the office – with the privacy glass, you can be confident that your messages, emails, and personal content remain visible only to you.

Electroplating Privacy Tempered Glass - the perfect blend of maximum privacy and stylish design.

Key Features:

• Privacy Technology – the screen is clearly visible only when viewed straight on, while it appears dark from the sides.

• Electroplating Surface – elegant appearance, easy to clean, and reduces fingerprint smudges.

• 9H Hardness – high resistance to scratches from keys, coins, and other objects.

• 0.3 mm Thickness – ultra-thin glass maintains perfect touch response and clear image quality.

• Drop Protection – absorbs impact and protects the original screen from damage.

Instructions for Applying the Tempered Glass:

1. Prepare your workspace: Find a clean and well-lit area. We recommend working in a low-dust environment to prevent debris on the screen during application.

2. Clean the screen: Use the cleaning wipe to thoroughly clean the screen of fingerprints, dust, and grease. Then dry the screen with a dry cloth.

3. Remove residual dust: Use the included sticker (or dust remover) to remove any remaining dust or particles from the screen.

4. Peel off the protective film from the glass: Carefully peel off the protective film from the tempered glass without touching the adhesive side.

5. Align the glass on the screen: Align the tempered glass with the edges of the screen, paying attention to cut-outs for the camera, speaker, and buttons. Apply the glass from one side (start from the top or centre) and slowly press it down.

6. Remove air bubbles: Once the glass is on the screen, gently press it to ensure adhesion. If air bubbles appear, use a cloth or your finger to push them towards the edges.

7. Let the glass settle: After application, allow the glass to settle for a while to ensure full adhesion. Avoid immediately putting on a protective case until the glass is fully adhered.

8. Apply a protective case (optional): If you use a protective case, ensure it does not interfere with the edges of the glass or cause it to lift.

Following these steps ensures proper application of the tempered glass, maximum screen protection, and extended product lifespan.