Mobilis Electroplating Privacy Tempered Glass with 9H hardness and 0.3 mm thickness.

Protect your iPhone not only from damage but also from prying eyes. Electroplating Privacy Tempered Glass combines top-notch screen protection with unique privacy technology, ensuring that only you can see the screen content.

Thanks to the electroplating surface, the glass has an elegant look, resists fingerprints, and stays clean even with daily use. With a hardness of 9H and a thickness of just 0.3 mm, it provides maximum safety without compromising touch sensitivity or image quality.

Whether you use your phone on public transport, in a café, or in the office – with this privacy glass, you can be sure your messages, emails, and personal content remain for your eyes only.

Electroplating Privacy Tempered Glass - a combination of maximum privacy and stylish design.

Key Features:

• Privacy Technology – the screen is clearly visible only when viewed straight on, appearing dark from the sides.

• Electroplating Surface – elegant design, easy cleaning, and reduced fingerprint smudges.

• 9H Hardness – high resistance to scratches from keys, coins, and other objects.

• 0.3 mm Thickness – ultra-thin glass preserves perfect touch response and clear image quality.

• Drop Protection – absorbs impact and protects the original screen from damage.

Application Instructions for Tempered Glass:

1. Prepare your workspace: Find a clean and well-lit area. It is recommended to work in a low-dust environment to avoid particles on the screen during application.

2. Clean the screen: Use the cleaning wipe to thoroughly clean the screen of fingerprints, dust, and grease. Then dry the screen with a dry cloth.

3. Remove final particles: Use the included sticker (or dust remover) to remove any remaining particles or dust from the screen.

4. Remove the protective film from the glass: Carefully peel off the protective film from the tempered glass without touching the adhesive side.

5. Align the glass on the screen: Align the tempered glass with the edges of the screen, particularly around the cutouts for the camera, speaker, and buttons. Apply the glass from one side (start at the top or centre) and slowly place it down.

6. Remove air bubbles: Once the glass is on the screen, gently press it to ensure it adheres properly. If air bubbles appear, use a cloth or your finger to push them towards the edges.

7. Let the glass settle: After application, allow the glass to settle to ensure it adheres firmly to the screen. Avoid immediately attaching a protective case until the glass has fully adhered.

8. Attach a protective case (optional): If using a protective case, carefully check that it does not interfere with the edges of the glass or cause it to lift.

Following these steps ensures proper application of the tempered glass, maximum screen protection, and extended durability.