Mobilis Electroplating Privacy Tempered Glass with 9H hardness and a thickness of 0.3 mm.

Protect your iPhone not only from damage but also from prying eyes. Electroplating Privacy Tempered Glass combines top-notch screen protection with unique privacy technology, ensuring that only you can see the content on your screen.

Thanks to its electroplating surface, the glass has an elegant appearance, resists fingerprints, and remains clean even with daily use. With a hardness of 9H and a thickness of just 0.3 mm, it provides maximum safety without compromising touch sensitivity or image quality.

Whether you’re using your phone on public transport, in a café, or at the office – with this privacy glass, you can be sure that your messages, emails, and personal content remain visible only to you.

Electroplating Privacy Tempered Glass - the perfect blend of maximum privacy and stylish design.

Key Features:

• Privacy Technology – the screen is clearly visible only when viewed straight on, with a darkened display from side angles.

• Electroplating Surface – elegant appearance, easy to clean, and reduced fingerprint smudges.

• 9H Hardness – highly resistant to scratches from keys, coins, and other objects.

• 0.3 mm Thickness – ultra-thin glass maintains perfect touch responsiveness and clear image quality.

• Drop Protection – absorbs impact and protects the original screen from damage.

Instructions for Applying the Tempered Glass:

1. Prepare your workspace: Find a clean and well-lit area. We recommend working in a low-dust environment to prevent dirt from getting on the screen during application.

2. Clean the screen: Use the cleaning wipe to thoroughly clean the screen of fingerprints, dust, and grease. Then dry the screen with a dry cloth.

3. Remove any remaining dust: Use the included sticker (or dust remover) to remove any remaining dust or particles from the screen.

4. Peel off the protective film from the glass: Carefully remove the protective film from the tempered glass without touching the adhesive side of the glass.

5. Place the glass on the screen: Align the tempered glass with the edges of the screen, paying particular attention to cut-outs for the camera, speaker, and buttons. Apply the glass from one side of the screen (starting at the top or centre) and slowly place it down.

6. Remove air bubbles: Once the glass is on the screen, gently press it to ensure it adheres properly. If air bubbles appear, use a cloth or your finger to push them towards the edges.

7. Allow the glass to settle: After application, let the glass settle to adhere firmly to the screen. Avoid immediately placing a protective case until the glass has fully adhered.

8. Attach a protective case (optional): If using a protective case, carefully check that it does not interfere with the edges of the glass or cause it to lift.

Following these steps will ensure proper application of the tempered glass, maximum screen protection, and extended durability.